Starrett

Starrett® telescoping gauges are used for determining the true size of holes, slots and recesses up to 6" (150 mm). ; 1/2-6" (13-150 mm) ; Each of...

Starrett® telescoping gauges are used for determining the true size of holes, slots and recesses up to 6" (150 mm). ; 1/2-6" (13-150 mm) ; Each of...

Starrett® telescoping gauges are used for determining the true size of holes, slots and recesses up to 6" (150 mm). ; 1/2-6" (13-150 mm) ; Each of...

Set of 5, Models HU121, HU122, HU123, HU124, HU125 in Case SETS Starrett® telescoping gauges are used for determining the true size of holes, slot...

The head is graduated both left and right to 30°, 45° and 60° One side of the base is cut out to permit easier and more accurate readings The cent...

The head is graduated both left and right to 30°, 45° and 60° One side of the base is cut out to permit easier and more accurate readings The cent...

Gauge can be smoothly adjusted to the required measurement and then locked into position by a knurled nut Base is cut out on one side, adjacent to...

Description: Set of 3 Inch Reading Dial Indicators: Nos. 25-I11J, 25-131J and 25-441J Specifications Range: 0" - 0.125"/0" - 1"/0" - 0.025" Addit...

Taper Gauge Specially designed for rapid, accurate checking of inside diameters of tubing.; Thin, tapered leaves graduated to measure inside diame...

These gauges are for determining hole sizes in dies and all kinds of other work. They read in thousandths of an inch or 0.02 mm. Made of tempered ...

Taper Gauge For bearing work and for gaging slots Made of quality tool steel; HU391 Taper Gauge: Top view is front side with inch measurement. Mid...

2 V-Blocks (One Pair) The V-Blocks of this set are of case hardened steel for wear resistance and may be used singly or in pairs.; This set includ...

Clamp Only The V-Blocks of this set are of case hardened steel for wear resistance and may be used singly or in pairs.; This set includes a steel ...

Complete Set with Two V-Blocks (One Pair) and Two Clamps Starrett® No. 278 V-Blocks are precision ground to extreme accuracy. The blocks are made ...

Clamp Only Starrett® No. 278 V-Blocks are precision ground to extreme accuracy. The blocks are made of steel, hardened and ground and numbered in ...

Specifications Display Type: Analogue Measuring Range: 0.039" - 0.0135" Additional Specifications EDP No.: 51320

Graduations include Quick-Reading 10ths, Aircraft Quick-Reading 50ths, 32nds and 64ths Full-flexible steel construction Single row of inch figures...

Graduations include 8ths, 16ths, Quick-Reading 32nds, 64ths Full-flexible steel construction Single row of inch figures Specifications Length: 6"...

Graduations include 8ths, 16ths, Quick-Reading 32nds, 64ths Semi-flexible steel construction Single row of inch figures Specifications Length: 6"...

Graduations include 0.5mm on one side with 1mm and 0.5mm on the reverse Full-flexible steel construction Single row of metric figures Specificatio...

Graduations in degrees through 360° Available with hardened 7" (175 mm) or 12" (300 mm) blades which can be rotated to the desired angle and adjus...

Replacement blade for C359/C364 Series Bevel Protractor 7" Blade Only Graduations in degrees through 360° Available with hardened 7" (175 mm) or 1...

12" Blade Only Replacement blade for C359/C364 Series Bevel Protractor Graduations in degrees through 360° Available with hardened 7" (175 mm) or ...

Replacement acute angle attachment only for C359 Series Bevel Protractor Acute Angle Attachment Only Graduations in degrees through 360° Available...